plywood Supplier Seattle WA marine woods Supplier in Seattle WA exotic wood supplier high quality wood working tools finishes decking supplies Seattle WA Tormek Jigs

SKU: WELD2
Size: 4.5 lb #00204
Description: Weldwood Plastic Resin Glue
Price: $39.20/EA
 
Quantity: Print
Product:
Name:


DAP Weldwood Plastic Resin Glue - 4.5 lb.                                         
       MSDS Information             Technical Data

DAP WELDWOOD Plastic Resin Glue is a powdered, pre-catalyzed water-activated glue designed to provide strong, durable bonds for wood and wood products.  Forms a stronger bond than the wood itself.  Plastic Resin Glue is an excellent glue for the craftsman, artisan or hobbyist. 

Ideal for:

  • Veneering
  • Laminating
  • Cabinet Work
  • Edge Gluing
  • General Woodworking 

Applications: 

  • Bonds laminates to wood, plywood and particleboard
  • Excellent for: Chopping Blocks, Cutting Boards, Counter Tops, Plates and Furniture

Performance Characteristics:

  • Forms a high strength, water-resistant bond.
  • Resistant to fungi, bacteria, oil, gasoline, or solvents.

Surface Preparation & Application:  Temperature of the surface and working area, as well as the adhesive, must be above 70°F.  Preferred moisture content of wood is 6% to 10%.  Make sure the surfaces to be bonded are clean, dry and free of oil, wax and foreign materials.  Do not use containers or tools of copper or copper bearing alloys to mix adhesive. 

Mix by weight or by volume in these ratios:

   Weight  Volume
Powder   10 parts  10 parts
 Water  6 parts  4 parts

Mix by adding powder to approximately 2/3 of the total water, then add the remaining water.   Once mixed, the mixture begins curing immediately, although a “pot life” of up to 4 hours exists.  Pot life will be affected bytemperature as such:

Degrees F 70   80  90   100
Pressure Period (Hours)  4  2.5  1  .5

Once the glue is applied, pressure should be applied.  Soft wood and machined hard woods can be glued at lowpressures (50 PSI).  Rough cut parts require more pressure (175 to 300 PSI) for softwood and hardwood respectively.  Sufficient adhesive should be applied so that some squeeze out of excess adhesive is visible at edges.  Glue line thickness should be from 0.003 + 0.006 inch for best results. 

 Degrees F 70  80   90  100  120  140
 Pressure Period (Hours)  13  8  5  3.25  1  .5

Clean Up:  Clean up with water before mixture hardens.  Once cured, Plastic Resin Glue cannot be removed from most surfaces successfully; sanding scraping or chiseling may be successful.  Test an inconspicuous area before proceeding.  Rinse all equipment with clean water after use.